Huntron Tracker 3200SStock No : 3200S

The NEW Huntron® Tracker® 3200S is designed to encompass our product history and leadership in power-off test by providing powerful test and troubleshooting solutions.

The Tracker 3200S features variable range parameters resulting in hundreds of voltage, source resistance and frequency combinations. You can create Tracker ranges to precisely fit your needs.

The Tracker 3200S uses a color, touch screen LCD for control of features such as range configuration, front panel pin selection and Channel A/B settings. The Tracker 3200S LCD provides a very fast screen refresh rate for quick screening of component pins and display the A and B channel signatures at the same time (A+B mode). The built-in Pulse Generator enables you to dynamically test gated devices such as SCRs, TRIACs and relays. It features two 64 pin IDC connectors for use with IC clips or custom cable interfaces or connect to a Huntron Access Prober for full diagnostic automation.

The Huntron Workstation software is included enabling you to automate analog signature analysis (ASA) based tests by creating a test plan, capturing signatures, comparing to stored signatures and viewing the results. The ability to automatically store signatures and document a specific test procedure allows for the sharing of knowledge among all users. Tracker Model 3200s LCD Tracker Model 3200S LCD - click to enlarge

Most Tracker users have their preferred range settings and the Tracker 3200S can save four range combinations that you use the most. These can be selected on the touch screen display (buttons 1-4).

The LCD also displays current ranges settings, pulse generator settings, current selected pin, SigAssist calculated values (resistance, capacitance, power, forward and reverse diode breakdown voltages), A vs. B comparison tolerance and Pass/Fail indication.

• Add the benefits of Power-Off test to your current diagnostic test strategy
• Can be used as a Stand-alone unit using the convenient front panel controls and touch screen LCD
• Match the circuit impedance by setting the applied voltage, frequency and source resistance
• Built-in Pulse Generator for testing gated devices such as relays, SCRs and TRIACs
• 128 pin scanning with 128 Commons using the built-in front panel IDC ribbon cable connectors
• Display A or B channels individually, in the switching ALT mode or in A+B mode to display both signatures at the same time
• Connect to a Huntron Access Prober for full test automation
• Use the Huntron Workstation software to create circuit board tests, store analog (V-I) signatures, make good vs. bad comparisons and present the results
• Having the Good board signatures stored on your PC eliminates the need to keep one for direct comparison
• A software based test allows for the sharing of board test knowledge with all personnel

Tracker Specification	Tracker 3200S  image	Tracker 2800  image	Tracker 2800S  image	Tracker Model 30  image	TrackerPXI  image
Number of Voltages plus values	24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2)	6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V	6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V	24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2)	24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2)
Number of Resitances plus values	16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low), 1.2kΩ (Med 1), 26.7kΩ (Med 2)	9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ	9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ	16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low), 1.2kΩ (Med 1), 26.7kΩ (Med 2)	16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low), 1.2kΩ (Med 1), 26.7kΩ (Med 2)
Number of Frequencies plus values	40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps	6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz	6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz	40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps	40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps
Range Selection	Manual, Auto Scan or Controlled by Huntron Workstation	Manual or use Auto Scan; Optional Software control	Manual or use Auto Scan; Optional Software control	Controlled by Huntron Workstation	Controlled by Huntron Workstation
Front Panel Connections	Banana jacks for A/B Test channels and Common	Banana jacks for A/B Test channels and Common	Banana jacks for A/B Test channels and Common; A and B 40 pin IDC connectors for cable based scanning (i.e. DIP clips)	Banana jacks for A/B Test channels and Common BNC jacks for A/B Test channels and Common	Banana jacks for A Test channel and Common; BNC jacks for A Test channels and Common; AUX jack