Universal 48-pin chip programmer with USB 2.0 and parallel connectivity. Dataman 48UXP features intelligent hardware, including microprocessor and FPGA, allowing it to program devices you use today and the devices of tomorrow.
Optimized for both laboratory and production the Dataman 48UXP is intelligent, fast and easy to use.
General
The Dataman 48UXP's on-board intelligence reduces system overhead to a minimum. This gives a 100% performance increase over its predecessor when programming high-density flash devices e.g. Intel 32 Mbit flash chip in less then 60 seconds
The Dataman 48UXP performs device insertion and contact checks before programming each device. It can detect poor pin contact and devices inserted upside down or in the wrong position preventing expensive chip damage due to operator error
The Dataman 48UXP's universal pin driver capability lets it program all 48-Pin DIL devices, including all single-chip Micro-controllers, without DIL-to-DIL adapters
The Dataman 48UXP has additional safety features such as a built-in current limit and pin continuity check function. This prevents damage from faulty chips during the programming cycle
Included with the Dataman 48UXP is a 44-Pin universal adapter that enables you to support 44-Pin chips such as EPLD, EPROM, Flash, EPLD and Micro-controllers, eliminating the need to buy multiple adapters
The Dataman 48UXP supports 2.0V ~ 5.0V logic level input/output and can supply 2.0V ~ 21V analogue voltages such as VCC. Low voltage support (1.8V) is also possible by a low voltage adapter
Programmer Specification
Base Unit (DAC)
USB 2.0 port
FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
On-board intelligence: powerful microprocessor and FPGA based state machine
Power: 100 to 240 VAC, auto-switching
Frequent range: 47 to 63 Hz
Power consumption: 25 W
Operating temperature: 5 to 45°C (41 to 113°F)
CE & LVD certified
ZIF Socket
48-pin DIL/ZIF socket with receptacle for 8-Pin to 48-Pin 300/600-mil devices
Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution. Software controllable rises time and current limit protection.
Logic driver supports pull-up/ pull-down or high impedance on all 48 pins with 2.0V-5V level
